369-HI-R-0-0-0 | Motor management relay

369-HI-R-0-0-0 Technical specifications

Communication No isolated RS232 port, RS485 port

Differential switch delay < 200ms

Dimensions :29.6 cm high x 10.7 cm wide x 20.5 cm long

Grounding current input frequency 20 to 100hz

Overvoltage Class ii

Nominal power :20va; Up to 65va

Waveform capture length 3 buffer contains 16 cycles of all current and voltage channels

Weighs about. Ten pounds

Product description

The 369-HI-R-0-0-0 is a motor management relay manufactured by General Electric Company. Control power supply 50-300vdc / 40-265 VAC. The relay has 12 optional RTD inputs. The device does not include metering or gyroscopic detection. No optical fiber port is available. The relay provides protection and monitoring for three-phase motors and their associated systems. The 369 can "learn" individual motor parameters and adapt to individual applications. To improve the protection of the relay, the user can adjust the motor's inrush current, cooling rate and/or acceleration time.

Relay protection features include automatic undervoltage restart, reverse power supply, starter failure, KVA requirement, KVA requirement, kilowatt requirement, current requirement, gyroscope detection, self-test/service, trip counter, RRTD communication loss, disconnect/disconnect RTD, short/low temperature RTD, ambient RTD, acceleration timer, mechanical plugging, restart blocking (Gyroscope timer) ), start suppression (available heat capacity), heat capacity, reactive power, main switch, differential switch, lockout, over/under frequency, alarm, start/start interval per hour, over voltage protection, power factor, overload protection, ground fault and ground fault backup, short circuit and backup, stator RTD, voltage reversal, current imbalance protection, bearing RTD, undercurrent/undercurrent protection, Undervoltage protection and speed switch.