Product Number: DS200DDTBG2A
Product type: LCI ADMA terminal board
The GE DS200DDTBG2A model is an LCI-assisted I/O terminal board that connects several other models via high-density connector ribbon cables. This model must be connected to ADMA because it powers the DDTB model.
Product Number: DS200DDTBG2A
Product type: LCI ADMA terminal board
The GE DS200DDTBG2A model is an LCI-assisted I/O terminal board that connects several other models via high-density connector ribbon cables. This model must be connected to ADMA because it powers the DDTB model.
The DS20ODDTBG2A is an auxiliary)/O terminal board for connecting and configuring auxiliary /O terminals. It has a high reliability design to ensure stable operation in harsh working environments. Supports various types of auxiliary I/O terminals to adapt to different circuit control requirements. Connections and Settings of auxiliary /O terminals can be easily configured and modified. Integrate a variety of protection functions, such as overload protection, short circuit protection, etc., to improve the security of the system. The DS200DDTBG2A model is the second version of the DS200DDTB model and belongs to the General Electric LS2100 family. One of the functions of this model is to provide scaling, buffering, signal conditioning, and isolation to enable DSPC's digital signal processor to obtain environmental system-level signals. The model includes two high-voltage AC inputs using passive filtering, a step-down transformer and a buffer to provide a ±5V peak-to-peak signal for the additional modular and VCO inputs, which will operate at 693VRMS.
The DS200DDTBG2A model is equipped with 12 three-pin bank jumpers. Each jumper has a separate setting and a separate function. Several other features in the DDTB model include high voltage and high current inputs, as well as low current signal inputs. When it comes to large current inputs, there are six with current resistors that are suitable for continuous current signals.
The DS200DDTBG2A model also features four optically isolated state outputs with a rated voltage of up to 48 volts and a reading of 10 mA for each output. If any problems arise, refer to the GEI-100219 manual for part specifications and to the GEH-6373 Series manual for accessory problems.
