DS200SDCIG2AEB | DS200DCFBG1BLC DC Power supply and Instrument panel【 Function Description 】
DS200SDCIG2AEB technical specification
Manufacturer ge General Electric
Series mark V
Part number DS200SDCIG2AEB
Product Type sdci DC Power supply and Instrument panel
Instruction Manual gei-100173
Product description
GE DC power supply and dashboard DS200SDCIG2AEB As the DC200 driver interface, DS200SDCIG2AEB is an electrostatic sensitive device, you must be careful in the energy mode, maintenance and installation of the device. Static electricity can touch the device through the air and people who touch the device
He devices and structures such as the way accumulated on the board. Static electricity may damage the sensitive components on the board, causing the board to be unavailable.
If you need to maintain the board, place the board on a flat and clean surface, and wear the ground strap before touching the board. The ground zone prevents static electricity from accumulating.
Walking and touching objects can cause static electricity to build up, so it's best not to move too much before using the board. When you do handle the board only hold its edges and never touch the mold to protect points or components. Before preparing for installation, remove it from its packaging and touch the unpainted metal
Surface to expel any static electricity. In this way, you can safely install the new board.
If you need to lay down the board after taking it out of the bag, place the board in an empty ESD bag
The capacitors on the DS200SDCIG2AEB can store high-voltage current even after disconnecting the current, so it is important to test the circuit board's current before touching it to prevent electrical burns and shock.
Frequently asked questions about DS200SDCIG2AEB
Which manual does DS200SDCIG2AEB use?
The manual for DS200SDCIG2AEB use is the General Electric Drive System Replacement Procedure SDC Power Supply and Dashboard Manual, although this manual is based on the manual for operating DS200SDCIG2AEB with another DS200SDCIG2AEB board, but this manual provides the following information
Information to help you understand DS200SDCIG2AEB,
What is the JP2 jumper used on DS200SDCIG2AEB?
The JP2 jumper on the DS200SDCIG2AEB is the DS200SDCIG2AEB MA AC contactor disconnect time jumper. In general, the circuit on the DS20SDCIG2AEB delays the opening of the AC adapter to ensure all the load on the DS200SDCIG2AEB
The current has gone out. Removing jumper JP2 while the DS200SDCIG2AEB is operating normally causes the control circuit to disconnect the MA relay before the current is 0
