IC694BEM31 | IC697BEM731 | Bus controller

 
Model: IC694BEM31
Category: Bus controller
Finish: New, not new
Warranty: One year
Brand: GE

Product profiling
The GE Fanuc IC694BEM31 Genius Bus controller connects to the PACSystems RX3i and Genius V0 serial buses. In addition to the bus controller, the bus will also provide :Genius module, remote drop, VersaMx, and field control /O
Stations, PLCS with Genius bus, Genus Handheld Display (HHM) and numerous hosts. Genius modules and other devices exchange 128 bytes with each device on the Genius V0 bus to report faults in an automatic manner, including alarms and certain
Previously defined problem. The bus controller then manages any diagnostic messages it receives, which are then read routinely by the CPU. If programming software is used, the fault can be displayed in the fault table.

The C694BEM31 maintains all Genius datagrams and can send up to 128 bytes of global data per bus review. Global data is data that is spontaneously and mechanically broadcast. Up to eight Genius bus controllers can be integrated into the system, each controlling
The device can transmit up to 128 bytes.

The IC694BEM331 is a Genius bus controller module that belongs to the GE/Emerson PACSystems RX3i product family.
The module is mainly used to connect PACSystems RX3i and Genius serial I/O bus.
It is a single slot module that is available via Genius blocks, PLCS using Genius bus controllers, remote I/O drops
VersaMax and field distributed //O for data exchange,
It is capable of exchanging up to 128 bytes of data with each Genius l/0 device and receiving 128 bytes of global data.
Up to eight (8) IC694BEM331 modules can be installed in the RX3i system.