Model: IS200TBCIH1BBC
Category: Carriage controller
Finish: new, not new
Stock: Yes
Brand: GE
Product parameters.
- Input voltage :24V DC
- Output voltage :0 to 10v DC
- Communication interface :Modbus RTU
- Temperature range :-40° C to 85 ° C
The GEIS200TBCIH1BBC is a bracket controller commonly used to control brackets or switchgear in power systems, such as circuit breakers, tool switches, ground switches, etc. This controller supports remote operation capabilities, allowing operators to monitor and control equipment from a remote location. In addition, it has a local operation panel that the operator can use to manually control the device or view the device status.
It should be noted that for specific operation and use, it is necessary to refer to the relevant user manual or operation guide to ensure the correct and safe use of the controller. In addition, for different power systems and application scenarios, different types of controllers or specific configurations and debugging may be required.
IS20OTBCIH1BBC is a device known as a contact terminal board. This is a PCB designed for the MarkVI series. The MarkVI series is one of the Mark series manufactured by General Electric Company (GE). These systems were developed to control all operations of gas and steam turbines in industrial environments.
IS200TBCIH1BBC is a long circuit board with a variety of different electronic components. Two (2) very large pure black terminals occupy the left half of the IS20OTBCIH1BBC. These terminal boards have forty-eight (48) terminals made of silver metal. These terminals are identified by a series of numbers from 1 to 48, with 24 in each terminal board. On the right side of the IS200TBCIH1BBC is a long series of circular capacitors. These capacitors are pure red. Twenty-five (25) of these capacitors are arranged adjacent to these HSBC subroutines. On the right edge of the IS20OTBCIH1BBC are three silver and black jack connector ports. To the right of each connector port is a very small integrated circuit labeled with the letter u. The other two (2) white connectors are located in the center of the top of the IS20OTBCIH1BBC. Both connectors contain three (3) ports that can be used to connect other components to the S20OTBCIH1BBC. There is a long, tiny resistance line on the right side of the PCB center. This line spans almost the entire length of is 200 BCl h1BBC.
