XVME-6744 is a VME bus standard digital input/output module, produced by VMIC Corporation. The module has the following features:
32 channels for digital input
32 channels digital output
Optional isolation
Optional surge protection
Supports multiple operating systems
The XVME-6744 module can be used in a variety of industrial control and automation applications, including:
Machine control
Data acquisition
Test and measurement
Process control
The technical specifications of XVME-6744 module are as follows:
Bus type: VME
Data width: 32 bits
Address range: 256MB
Interrupt requests: 4
Power supply: +5V, +12V, -12V
The XVME-6744 module is connected in the following ways:
VME bus connector
Digital input connector
Digital output connector
The usage of XVME-6744 module is as follows:
Install the module into the VME chassis
Connect a digital input connector to a sensor or switch
Connect the digital output connector to the actuator or indicator
Configure modules in the software
Features:
33 MHz 80486DX or 66 MHz 80486DX2 processor
4, 16 or 32 MB DRAM
IDE hard disk and floppy disk controller
VGA graphics controller
2 serial ports and 1 parallel port
The Xycom XVME-674 VMEbus PC/AT processor module is a powerful VMEbus PC-compatible processor module. This powerful single-slot VMEbus processor integrates a 33 MHz 80486DX or 66 MHz 80486DX2 CPU and up to 32 MB of DRAM, hard and floppy disk controllers, and VGA graphics controllers. The XVME-674 also contains a VMEbus circuit breaker. This local interrupt program allows the local CPU to generate VMEbus interrupts on any of the seven VMEbus interrupt levels.
