The GE IS420ESWAH2A is an 8‑port 10/100Base‑TX copper + 2‑port 100Base‑FX multi‑mode fiber Ethernet/IONet switch for GE Mark VIe/VIeS turbine control systems, built for real‑time I/O data exchange and network redundancy in power generation, oil & gas, and heavy industry, with non‑managed plug‑and‑play operation and wide‑temperature resilience (‑40℃~+70℃) for critical control loops requiring SIL‑compliant reliability.
- Dual Media Flexibility: 8 copper ports for local I/O (e.g., IS220PTCCH2A) + 2 fiber ports for long‑distance uplinks (up to 2 km over multi‑mode fiber), cutting copper wiring costs by 50% vs. all‑copper switches in large turbine skids.
- IONet Native Integration: Seamlessly connects Mark VIe controllers (IC698) and I/O packs to IONet, ensuring <1 ms latency for turbine speed/load control and preventing data loss during network failover.
- Plug‑and‑Play Non‑Managed Design: No manual configuration—auto‑negotiates speed/duplex and auto‑MDIX eliminates crossover cables, reducing deployment time by 70% vs. managed switches in TMR retrofits.
- Industrial Resilience: Wide‑temperature operation (‑40℃~+70℃) and surge immunity handle harsh turbine hall/control room environments; fiber ports avoid EMI/RFI interference from VFDs or high‑voltage equipment.
- Redundant Uplinks: 2 fiber ports enable ring/linear redundancy, ensuring 99.999% network availability—critical for turbine anti‑surge, fuel control, and safety trips.
- Gas Turbine I/O Network: 8 copper ports connect 8 Mark VIe I/O packs (e.g., IS220PAICH2A, IS220PTCCH2A); 2 fiber ports link to Mark VIe controller or redundant ring, enabling 100% I/O data availability during single‑port failure. A 2×1 combined‑cycle plant using 4 switches reduced network‑related outages by 90% vs. legacy hubs.
- Steam Turbine BOP Control: Aggregates 8 boiler feed pump I/O signals (4–20 mA, thermocouple); fiber uplinks connect to DCS, isolating control networks from mill electrical noise and complying with IEEE 1613 substation standards.
- Refinery Compressor Safety: Supports TMR I/O network for anti‑surge valve and vibration monitor data; non‑managed operation avoids human error in configuration, meeting SIL 2 for overpressure protection.
- Wind Farm SCADA Backhaul: 8 copper ports connect turbine controller I/O; 2 fiber ports daisy‑chain 10+ turbines over 2 km, reducing fiber deployment costs by 30% vs. point‑to‑point links.
- Warranty: 12‑month standard warranty; free replacement for non‑human faults (e.g., port failure, power surge damage) with 48‑hour expedited shipping for power generation customers.
- Technical Support: Pre‑sales IONet redundancy design and port mapping guidance; free ToolboxST software for LED status interpretation and wiring diagrams; on‑site training for Mark VIe integration with bulk orders.
- Spare Parts & Upgrades: Compatible with Mark VIe redundant power supplies and fiber LC patch cords; upgradeable to ESW‑B (IS420ESWBH2A, 16 copper ports) for I/O expansion.
-
- GE Mark VIe IS420ESWBH2A: 16‑port copper + 2‑port fiber variant for larger I/O networks.
- GE TBCH‑ESWA: 8‑port terminal block for copper port surge protection (6kV ESD).
- GE CIMPLICITY HMI: Monitors switch status and IONet traffic for real‑time fault isolation.
- GE ToolboxST: Configures Mark VIe I/O network and interprets switch LED diagnostics.
For IONet redundancy ring design, fiber distance calculations, or bulk quotations, contact:
- WhatsApp: https://wa.me/+86 19389860630
- Email: hnjlyori@163.com
Our GE Mark VIe‑certified engineers can provide one‑on‑one support for switch deployment, port mapping, and system integration with turbine/DCS controls.
