TB-2706 Metal enclosure junction box

Manufacturer :NI
Product model :TB-2706
Product Type TB-2706 Metal enclosure junction box


This National Instruments TB-2706 patch board consists of 70 screw terminals. These screw terminals are designed to connect various PXI modules. The TB-2706 patch board is located in the front panel of the PX chassis.
This nickel TB-2706 patch board is suitable for a variety of PXI instruments, including PXI-622X,PXl-625x to suck PXI-628X devices. This TB-2706 patch board also supports the connection of PXle-625x and PXI-
Module 6143. This nickel TB-2706 patch board can connect analog inputs and analog outputs to the PXI NI module.
This nickel TB-2706 is designed for M-series data acquisition modules. The TB-2706 patch board is equipped with a 68-pin plug VHDCI connector. This nickel TB-2706 patch board operates at 42 Vpeak or 60
VDC or lower. This National Instruments TB-2706 patch board can be operated with 26-16 AWG terminal wires. With easy access to digital input/output and timer TB-2706.
TB-2706 has the following features:

Strong degreasing ability: it can effectively remove all kinds of mechanical grease and dirt, including lubricating oil, hydraulic oil, cutting oil, etc.
Good adaptability: suitable for various materials of parts, such as metal, plastic, rubber and so on.
Easy to use: can be diluted after use, you can also directly use the original solution.
Safe and reliable: no irritating odor, harmless to human body.
When using TB-2706, the following points need to be noted:

Avoid contact with eyes or skin. If accidentally splashed, rinse immediately with plenty of water.
Store in a cool, ventilated place away from fire and heat sources.
Wear personal protective equipment such as protective gloves and glasses when using.
For some parts of special materials, tests should be carried out before use to confirm that there will be no adverse reactions.